![background image](http://html.mh-extra.com/html/2gig-technologies/gc3/gc3_user-manual_439576071.webp)
6.
Tap
Start
. The system scans the network for failed nodes. This
can take several minutes and some of the Z-Wave functions will
be unavailable until the network check is complete.
Rediscovering the Network
After adding or removing devices from the network, (see "Adding a Z-
Wave Device to the Network" on page 68 or "Removing a Device from the
Network" on page 69), use the steps below to rediscover the network.
To rediscover the network:
1.
At the Home screen, tap
System Settings
.
2.
Enter the Master User Code to access the
System Settings
menu.
3.
At the
System Settings
menu, tap
Smart Home Settings
.
4.
NOTE:
Consult your installer to determine if this
feature is available. This feature is not enabled on all
systems.
5.
At the
Smart Home Settings
menu, tap
Rediscover Network
.
6.
At the
Rediscover Network
screen, tap
Start
.
The system remaps the network. This can take several minutes
and Z-Wave functions will be unavailable until the network
rediscovery is complete.
Viewing All Devices
To view all of the network's devices:
1.
At the Home screen, tap
System Settings
.
2.
Enter the Master User Code to access the
System Settings
menu.
10 System Settings
Proprietary & Confidential
71
Copyright © 2015 Nortek Security & Control LLC