![background image](http://html.mh-extra.com/html/2gig-technologies/gc3/gc3_user-manual_439576033.webp)
1.
Below the
Sensors Not Ready
list, tap
Bypass All
.
Figure 3
Sensors Not Ready > Bypass All
2.
At the
Enter Your Code to Bypass Sensors
screen, enter an
active, four-digit user code.
Figure 4
Enter Your Code to Bypass Sensors
3.
When the system status message changes to
System Ready to
Arm (BYPASS)
, tap the YELLOW icon in the center of the arming
buttons.
Figure 5
System Ready to Arm (BYPASS)
This opens the
Bypassed Sensors
list.
Figure 6
Bypassed Sensors List
You can now arm the system. See "Arm the System" on page 31.
Canceling a Bypassed Sensor
To remove a sensor from the
Bypassed Sensor
list:
1.
Below the
Bypassed Sensors
list, tap
Cancel Bypass
.
Figure 7
Bypassed Sensors > Cancel Bypass Button
2.
At the
Enter Your Code to Cancel Bypass
screen, enter an
active, four-digit user code.
Figure 8
Enter Your Code to Cancel Bypass
This changes the system's status back to
System Not Ready to
Arm
and moves the sensor to the
Sensors Not Ready
list.
Figure 9
System Not Ready to Arm—Sensors Not Ready List
Use the Quick Exit Button
The
Quick Exit
button gives users the ability to start an
Exit Delay
countdown while the system is armed. This gives users the ability to leave
the premises through an
Exit/Entry
door, instead of having to disarm and
then rearm the system. When the
Allow Quick Exit
setting is enabled, the
Quick Exit
button appears on the
System Armed
screen.
4 Burglary Protection
Proprietary & Confidential
33
Copyright © 2015 Nortek Security & Control LLC