ZyXEL Communications Prestige 650ME, User Manual, Page: 78 / 199

Prestige 650ME ADSL Bridge
5-2 Remote Node TCP/IP Configuration
Table 5-1 TCP/IP-Related Fields in Menu 11.1 – Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Route
Make sure IP is among the protocols in the Route field in Menu 11.1 –
Remote Node Profile .
IP
Edit
IP/Bridge Press [SPACE BAR] to select Yes and press [ENTER] to display Menu
11.3 – Remote Node Network Layer Options .
Yes
Figure 5-2 Menu 11.3 - Remote Node Network Layer Options
The following table shows the fields in Menu 11.3 – Remote Node Network Layer Options .
Table 5-2 TCP/IP Remote Node Configuration
FIELD DESCRIPTION EXAMPLE
IP Address
Assignment Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the
ISP node (the first node); all other nodes are set to
Static .
Static
Rem IP Addr This is the IP address of the remote gateway . Type the remote
Prestige’s WAN IP address here (172.16.02 in the example Figure 5-1
shown previously). If the remote Prestige’s WAN IP address is 0.0.0.0,
then type 192.168.1.1 (its LAN IP address) here.
0.0.0.0
Rem Subnet
Mask Type the subnet mask assigned to the remote node. 0.0.0.0
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment= Static Ethernet Addr Timeout (min)= 0
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= SUA Only
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies=
Press ENTER to Confirm or ESC to Cancel: