ZyXEL Communications Prestige 650ME, User Manual, Page: 55 / 199

Prestige 650ME ADSL Bridge
Internet Access 3-9
Figure 3-7 Menu 3.2 – TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
Table 3-2 DHCP Ethernet Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
DHCP Setup
DHCP If set to Server , your Prestige can assign IP addresses, an IP
default gateway and DNS servers to Windows 95, Windows NT
and other systems that support the DHCP client.
If set to
None , the DHCP server will be disabled.
If set to Relay , the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server
and the clients. Enter the IP address of the actual, remote DHCP
server in the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
Server
Client IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the IP
address pool. 192.168.1.2
Size of Client IP Pool This read-only field specifies the size or count of the IP address
pool.
4
Menu 3.2 – TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.2
Size of Client IP Pool= 4
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.248
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
First address in
the IP Pool
Size of the IP
Pool
IP addresses of
DNS servers
This is the IP
address of the
Prestige