ZyXEL Communications Prestige 650ME, User Manual, Page: 37 / 199

Prestige 650ME ADSL Bridge
Hardware Installation and Initial Setup 2-9
2.8.1 Methods of Restoring Factory-Defaults
You can erase the current configuration and restore factory defaults in three ways:
a. Use the web configurator (see the web configurator HTML help).
b. Upload the default configuration file via the console port. See later in this User’s Guide
for more information on how to transfer the configuration file to your Prestige using the
SMT menus.
c. Use the RESET button on the rear panel of the Prestige (see the next section).
2.8.2 Procedure To Use The Reset Button
Step 1.
Turn your Prestige off and then on. Make sure the SYS LED is on (not blinking).
Step 2. Press the RESET button for five seconds and then release it. If the SYS LED begins to blink,
the defaults have been restored and the Prestige restarts.
2.8.3 Prestige SMT Menu Overview
The following figure gives you an overview of the various SMT menu screens of your Prestige.