ZyXEL Communications Prestige 650ME, User Manual, Page: 68 / 199

Prestige 650ME ADSL Bridge
4-4 Remote Node Configuration
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION EXAMPLE
Multiplexing Press [SPACE BAR] and then [ENTER] to select the method
of multiplexing that your ISP uses, either
VC-based or LLC-
based .
LLC-based
Service Name When using PPPoE encapsulation, type the name of your
PPPoE service here.
Incoming:
Rem Login
Type the login name that this remote node will use to call
your Prestige. The login name and the
Rem Password will
be used to authenticate this node.
Rem Password Type the password used when this remote node calls your
Prestige.
Outgoing:
My Login
Type the login name assigned by your ISP when the Prestige
calls this remote node.
My Password Type the password assigned by your ISP when the Prestige
calls this remote node.
This field sets the authentication protocol used for outgoing
calls. Options for this field are:
CHAP / PAP – Your Prestige will accept either CHAP or PAP
when requested by this remote node.
CHAP – accept CHAP (Challenge Handshake Authentication
Protocol) only.
CHAP/PAP
Authen
PAP – accept PAP (Password Authentication Protocol) only.
Route This field determines the protocol used in routing. Options are
IP and None.
IP
Bridge Press [SPACE BAR] to select Yes and press [ENTER] to
enable bridging.
When bridging is enabled, your Prestige will forward any
packet that it does not route to this remote node; otherwise,
the packets are discarded.
No
Edit IP/Bridge
Press [SPACE BAR] to select Yes and press [ENTER] to
display Menu 11.3 – Remote Node Network Layer Options .
No
Telco Option
Allocated Budget (min)
This sets a ceiling for outgoing call time for this remote node.
The default for this field is 0 meaning no budget control. 0