ZyXEL Communications Prestige 650ME, User Manual, Page: 185 / 199

Prestige 650ME ADSL Bridge
Boot Module Commands K
Appendix D
Boot Module Commands
When you reboot your Prestige, you will be given a choice to go into debug mode by pressing a key at the
prompt shown in the following screen. In debug mode you have access to a series of boot module commands,
for example ATUR (for uploading firmware) and ATLC (for uploading the configuration file) already
discussed in a previous section.
Diagram 4 Option to Enter Debug Mode
Type "ATHE" to view all available Prestige boot module commands. Some are shown in the next screen.
Most commands aid in advanced troubleshooting and should only be used by qualified engineers.
Bootbase Version: V1.02 | 10/11/2001 13:36:19
RAM: Size = 8192 Kbytes
DRAM POST: Testing: 8192K
OK
FLASH: Intel 16M *1
ZyNOS Version: V3.40(ES.0)b8 | 12/4/2001 12:54:08
Press any key to enter debug mode within 3 seconds.