ZyXEL Communications Prestige 650ME, User Manual, Page: 170 / 199

Prestige 650ME ADSL Bridge
15-2 Remote Management
15.4.1 Remote Management Setup
Remote management setup is for managing Telnet, FTP and Web services. You can customize the service
port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your Prestige from a remote location via:
the Internet ( WAN only ), the LAN ( LAN only ) , LAN and WAN ( All ) or neither ( Disable ).
WAN only
(Internet)
ALL
(LAN and WAN)
LAN only Disable (Neither)
If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 – Remote Management Control as shown next.
Figure 15-2 Menu 24.11 – Remote Management Control
Table 15-1 Menu 24.11 – Remote Management Control
FIELD DESCRIPTION EXAMPLE
Telnet Server
FTP Server
Web Server Each of these read-only labels denotes a service that you may use to
remotely manage the Prestige.
Port This field shows the port number for the remote management service.
You may change the port number for a service if needed, but you
must use the same port number to use that service for remote
management. 23
Access Select the access interface (if any) by pressing the [SPACE BAR].
Choices are:
LAN only , WAN only , All or Disable .
LAN only
(Default)
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = LAN only
Secured Client IP = 0.0.0.0
FTP Server: Port = 21 Access = LAN only
Secured Client IP = 0.0.0.0
Web Server: Port = 80 Access = LAN only
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: