ZyXEL Communications PMG5318-B20A User Manual Download Page 91

Page: 91 / 168

Chapter 9 Voice

PMG5318-B20A User’s Guide

Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. To access this
screen, click VoIP > Phone Book > Speed Dial.

Figure 48

VoIP > Phone Book > Speed Dial

Each field is described in the following table.

Table 33

VoIP > Phone Book > Speed Dial

LABEL

DESCRIPTION

Speed Dial

Use this section to create or edit speed-dial entries.

Select the speed-dial number you want to use for this phone number.

Number

Enter the SIP number you want the GPON Device to call when you dial the speed-dial
number.

Description

Enter a description for this speed dial number. You can use up to 128 alphanumeric
characters.

Add

Click this to use the information in the Speed Dial section to update the Speed Dial
Phone Book section.

Speed Dial Phone
Book

Use this section to look at all the speed-dial entries and to erase them.

This field displays the speed-dial number you should dial to use this entry.

Number

This field displays the SIP number the GPON Device calls when you dial the speed-dial
number.

Destination

This field is blank, if the speed-dial entry uses one of your SIP accounts. Otherwise, this
field shows the IP address or domain name of the SIP server or other party. (This field
corresponds with the Type field in the Speed Dial section.)

Modify

Use this field to edit or erase the speed-dial entry.

Click the Edit icon to copy the information for this speed-dial entry into the Speed Dial
section, where you can change it.

Click the Remove icon to erase this speed-dial entry.

Summary of Contents for PMG5318-B20A









































































































































































Search results

Summary of Contents for PMG5318-B20A

Reviews:

Brands by name

Popular brands

ZyXEL Communications PMG5318-B20A, User Manual

Search results

Summary of Contents for PMG5318-B20A

Reviews:

Brands by name

Popular brands