ZyXEL Communications PMG5318-B20A, User Manual

Page: 22 / 168

Chapter 3 Status Screens
PMG5318-B20A User’s Guide
22
Each field is described in the following table.
Table 3
Status
LABEL DESCRIPTION
Device Information
Host Name This field displays the GPON Device system name. It is used for identification.
You can change this in the Maintenance > System > General screen’s
System Name field.
Model Name This is the model name of the GPON Device.
Firmware Version This field displays the current version of the firmware inside the device. It also
shows the date the firmware version was created. Click this to go to the screen
where you can change it.
WAN Status This section displays connection information for each WAN connection configured
on the GPON Device.
Mode This is the method of encapsulation used by your service provider for this WAN
connection.
IP Address This field displays the IP address of the WAN connection.
IP Subnet
Mask
This field displays the WAN connection’s subnet mask.
Default
Gateway
This field displays the IP address of the default gateway, if applicable.
First/Second/
Third DNS
Server
These are the DNS server IP addresses assigned to the WAN connection.
IPv6 Global
Address
This is the IPv6 global address of the WAN connection.
IPv6 Link local
Address
This is the link-local address assigned to the WAN connection.
IPv6 First/
Second/Third
DNS Server
These are the IPv6 DNS server IP addresses assigned to the WAN connection.
LAN Information
IP Address This field displays the current IP address of the GPON Device in the LAN. Click
this to go to the screen where you can change it.
IP Subnet
Mask
This field displays the GPON Device’s current subnet mask in the LAN.
MAC Address This shows the LAN Ethernet adapter MAC (Media Access Control) address of
your GPON Device.