manualshive.com logo in svg

ZyXEL Communications PMG5318-B20A, User Manual

Share
Download
ZyXEL Communications PMG5318-B20A User Manual Download Page 57

 Chapter 6 Wireless LAN

PMG5318-B20A User’s Guide

57

6.9  Wireless LAN Technical Reference

This section discusses wireless LANs in depth. For more information, see the appendix.

6.9.1  Wireless Network Overview

Wireless networks consist of wireless clients, access points and bridges. 

• A wireless client is a radio connected to a user’s computer. 
• An access point is a radio with a wired connection to a network, which can connect with 

numerous wireless clients and let them access the network. 

• A bridge is a radio that relays communications between access points and wireless clients, 

extending a network’s range. 

Traditionally, a wireless network operates in one of two ways.

• An “infrastructure” type of network has one or more access points and one or more wireless 

clients. The wireless clients connect to the access points.

• An “ad-hoc” type of network is one in which there is no access point. Wireless clients connect to 

one another in order to exchange information.

The following figure provides an example of a wireless network.

Figure 30   

Example of a Wireless Network

The wireless network is the part in the blue circle. In this wireless network, devices A and B use the 
access point (AP) to interact with the other devices (such as the printer) or with the Internet. Your 
GPON Device is the AP.

Summary of Contents for PMG5318-B20A









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands