Chapter 8 AP Profile
NWA5000 / WAC6500 Series User’s Guide
98
Figure 57
SSID > MAC Filter List > Add/Edit MAC Filter Profile
The following table describes the labels in this screen.
8.6 Layer-2 Isolation List
Layer-2 isolation is used to prevent wireless clients associated with your NWA/WAC from
communicating with other wireless clients, APs, computers or routers in a network.
In the following example, layer-2 isolation is enabled on the NWA/WAC to allow a guest wireless
client (
A
) to access the main network router (
B
). The router provides access to the Internet and the
Table 49
SSID > MAC Filter List > Add/Edit MAC Filter Profile
LABEL
DESCRIPTION
Profile Name
Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores are
allowed.
Filter Action
Select
allow
to permit the wireless client with the MAC addresses in this profile to connect
to the network through the associated SSID; select
deny
to block the wireless clients with
the specified MAC addresses.
Add
Click this to add a MAC address to the profile’s list.
Edit
Click this to edit the selected MAC address in the profile’s list.
Remove
Click this to remove the selected MAC address from the profile’s list.
#
This field is a sequential value, and it is not associated with a specific user.
MAC
This field specifies a MAC address associated with this profile.
Description
This field displays a description for the MAC address associated with this profile. You can
click the description to make it editable. Enter up to 60 characters, spaces and underscores
allowed.
OK
Click
OK
to
save your changes back to the NWA/WAC.
Cancel
Click
Cancel
to exit this screen without saving your changes.
Summary of Contents for NWA5121-N
Page 10: ...10 PART I User s Guide...
Page 38: ...38 PART II Technical Reference...
