ZyXEL Communications NWA5121-N, User Manual

Page: 171 / 228

Chapter 14 File Manager
NWA5000 / WAC6500 Series User’s Guide
171
Click Maintenance > File Manager > Shell Script to open this screen. Use the Shell Script
screen to store, name, download, upload and run shell script files. You can store multiple shell
script files on the NWA/WAC at the same time.
Note: You should include
write
commands in your scripts. If you do not use the
write
command, the changes will be lost when the NWA/WAC restarts. You could use
multiple
write
commands in a long script.
Figure 102
Maintenance > File Manager > Shell Script
Each field is described in the following table.
Table 81
Maintenance > File Manager > Shell Script
LABEL DESCRIPTION
Rename Use this button to change the label of a shell script file on the NWA/WAC.
You cannot rename a shell script to the name of another shell script in the NWA/WAC.
Click a shell script’s row to select it and click Rename to open the Rename File screen.
Specify the new name for the shell script file. Use up to 25 characters (including a-zA-Z0-
9;‘~!@#$%^&()_+[]{}’,.=-).
Click OK to save the duplicate or click Cancel to close the screen without saving a duplicate of
the configuration file.
Remove Click a shell script file’s row to select it and click Delete to delete the shell script file from the
NWA/WAC.
A pop-up window asks you to confirm that you want to delete the shell script file. Click OK to
delete the shell script file or click Cancel to close the screen without deleting the shell script
file.
Download Click a shell script file’s row to select it and click Download to save the configuration to your
computer.
Copy Use this button to save a duplicate of a shell script file on the NWA/WAC.
Click a shell script file’s row to select it and click Copy to open the Copy File screen.
Specify a name for the duplicate file. Use up to 25 characters (including a-zA-Z0-
9;‘~!@#$%^&()_+[]{}’,.=-).
Click OK to save the duplicate or click Cancel to close the screen without saving a duplicate of
the configuration file.
Run Use this button to have the NWA/WAC use a specific shell script file.
Click a shell script file’s row to select it and click Run to have the NWA/WAC use that shell script
file. You may need to wait awhile for the NWA/WAC to finish applying the commands.