Chapter 1 Introduction
NWA5000 / WAC6500 Series User’s Guide
22
The following table describes the LEDs.
Table 6
WAC LEDs
LED
COLOR
STATUS
DESCRIPTION
PWR/SYS Red
Slow
Blinking
(On for 1s,
Off for 1s)
The WAC is booting up.
Green
On
Red
Off
The WAC is ready for use.
Green
On
Red
On
There is system error and the WAC cannot boot up, or the
WAC suffered a system failure.
Green
Off
Red
Fast
Blinking (on
for 50ms,
Off for
50ms)
The WAC is doing firmware upgrade.
Green
Off
Red Slow
Blinking
(blink for 3
times, Off
for 3s)
The Uplink is disconnected.
Green
Off
Red
Slow
Blinking
(blink for 2
times, Off
for 3s)
The wireless module of the WAC is disabled or failed.
Green
Off
Management
Green
On
The WAC AP is managed by a controller.
Blinking
The WAC AP is searching (discovery) for a controller.
Off
The WAC AP is in standalone mode.
WLAN
Green
On
The 2.4 GHz WLAN is active.
Blinking
The 2.4 GHz WLAN is transmitting or receiving data.
Off
The 2.4 GHz WLAN is not active.
WLAN
Green
On
The 5 GHz WLAN is active.
Blinking
The 5 GHz WLAN is transmitting or receiving data.
Off
The 5 GHz WLAN is not active.
UPLINK
Amber/Green
On
Amber - The port is operating as a 100-Mbps connection.
Green - The port is operating as a Gigabit connection (1000
Mbps).
Blinking
The WAC is sending/receiving data through the port.
Off
The port is not connected.
Summary of Contents for NWA5121-N
Page 10: ...10 PART I User s Guide...
Page 38: ...38 PART II Technical Reference...
