ZyXEL Communications NWA5121-N, User Manual

Page: 63 / 228

Chapter 5 Network
NWA5000 / WAC6500 Series User’s Guide
63
5.4 AC (AP Controller) Discovery
This section discusses how to configure the NWA/WAC’s AC Discovery (AP Controller) settings. You
can have the NWA/WAC managed by an AP controller on your network. When you do this, the NWA/
Apply Click Apply to save your changes back to the NWA/WAC.
Reset Click Reset to return the screen to its last-saved settings.
LAN Setting
Port Setting
Edit Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings. In some tables you can just click a table entry and edit it directly in
the table. For those types of tables small red triangles display for table entries with
changes that you have not yet applied.
Activate/
Inactivate
To turn on an entry, select it and click Activate . To turn off an entry, select it and click
Inactivate .
# This is the index number of the port.
Status This field displays the current status of each port.
Inactive - The port is disabled.
Active - The port is enabled.
Port This field displays the name of the port.
PVID This field displays the port number of the VLAN ID.
VLAN Configuration
Add Click this to create a new entry. For features where the entry’s position in the numbered
list is important (features where the NWA/WAC applies the table’s entries in order like
the SSID for example), you can select an entry and click
Add to create a new entry
after the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings. In some tables you can just click a table entry and edit it directly in
the table. For those types of tables small red triangles display for table entries with
changes that you have not yet applied.
Remove To remove an entry, select it and click Remove . The NWA/WAC confirms you want to
remove it before doing so.
Activate/
Inactivate
To turn on an entry, select it and click Activate . To turn off an entry, select it and click
Inactivate .
# This is the index number of the VLAN ID
Status This field displays the current status of each VLAN.
Inactive - The VLAN is disabled.
Active - The VLAN is disabled.
Name This field displays the name of each VLAN.
VID This field displays the VLAN ID.
Member This field displays the VLAN membership to which the port belongs.
Apply Click Apply to save the information entered in this screen.
Reset Click Reset to return the screen to its last-saved settings.
Table 30
Configuration > Network > VLAN (continued)
LABEL DESCRIPTION