manualshive.com logo in svg

ZyXEL Communications NWA5121-N, User Manual

Share
Download
ZyXEL Communications NWA5121-N User Manual Download Page 52

Chapter 4 Monitor

NWA5000 / WAC6500 Series User’s Guide

52

The following table describes the labels in this screen.  

4.7  Detected Device 

Use this screen to view information about suspected rogue APs. Click 

Monitor > Wireless > 

Detected Device

 to access this screen. Not all NWA/WACs support monitor mode and rogue APs 

detection.

Note: The radio or at least one of the NWA/WAC’s radio must be set to monitor mode (in 

the 

Wireless > AP Management

 screen) in order to detect other wireless devices 

in its vicinity.

Table 26   

Monitor > Wireless > WDS Link Info

LABEL

DESCRIPTION

WDS Uplink Info

WDS Downlink 
Info

Uplink

 refers to the WDS link from the repeaters to the root AP.

Downlink

 refers to the WDS link from the root AP to the repeaters.

When the NWA/WAC is in root AP mode and connected to a repeater, only the downlink 
information is displayed.

When the NWA/WAC is in repeater mode and connected to a root AP directly or via another 
repeater, the uplink information is displayed.

When the NWA/WAC is in repeater mode and connected to a root AP and other repeater(s), 
both the uplink and downlink information would be displayed.

#

This is the index number of the root AP or repeater in this list.

MAC Address

This is the MAC address of the root AP or repeater to which the NWA/WAC is connected 
using WDS.

Radio

This is the radio number on the root AP or repeater to which the NWA/WAC is connected 
using WDS.

SSID Name

This indicates the name of the wireless network to which the NWA/WAC is connected using 
WDS. 

Security Mode

This indicates which secure encryption methods is being used by the NWA/WAC to connect 
to the root AP or repeater using WDS.

Signal Strength

This is the RSSI (Received Signal Strength Indicator) of the wireless connection in WDS.

Tx Rate

This is the maximum transmission rate of the root AP or repeater to which the NWA/WAC is 
connected using WDS.

Rx Rate

This is the maximum reception rate of the root AP or repeater to which the NWA/WAC is 
connected using WDS.

Association Time This displays the time the NWA/WAC first associated with the wireless network using WDS.

Refresh

Click this to refresh the items displayed on this page.

Summary of Contents for NWA5121-N





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands