Chapter 12 System
NWA5000 / WAC6500 Series User’s Guide
143
12.5.5.1 Example 1: Microsoft Windows
This section describes how to access the NWA/WAC using the Secure Shell Client program.
1
Launch the SSH client and specify the connection information (IP address, port number) for the
NWA/WAC.
2
Configure the SSH client to accept connection using SSH version 1.
3
A window displays prompting you to store the host key in you computer. Click
Yes
to continue.
Figure 86
SSH Example 1: Store Host Key
Enter the password to log in to the NWA/WAC. The CLI screen displays next.
12.5.5.2 Example 2: Linux
This section describes how to access the NWA/WAC using the OpenSSH client program that comes
with most Linux distributions.
1
Test whether the SSH service is available on the NWA/WAC.
Enter “
telnet 192.168.1.2 22
” at a terminal prompt and press
[ENTER]
. The computer
attempts to connect to port 22 on the NWA/WAC (using the default IP address of 192.168.1.2).
A message displays indicating the SSH protocol version supported by the NWA/WAC.
Figure 87
SSH Example 2: Test
2
Enter “
ssh –1 192.168.1.2
”. This command forces your computer to connect to the NWA/WAC
using SSH version 1. If this is the first time you are connecting to the NWA/WAC using SSH, a
message displays prompting you to save the host information of the NWA/WAC. Type “
yes
” and
press
[ENTER]
.
Then enter the password to log in to the NWA/WAC.
$ telnet 192.168.1.2 22
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.
SSH-1.5
-1.0.0
Summary of Contents for NWA5121-N
Page 10: ...10 PART I User s Guide...
Page 38: ...38 PART II Technical Reference...
