ZyXEL Communications NBG-417N, User Manual, Page: 90 / 279

Chapter 7 Wireless LAN
User
’
s Guide
91
To change your NBG4115 ’ s MAC filter settings, click Network > Wireless LAN >
MAC Filter . The screen appears as shown.
Figure 46 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 30 Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION
Active Select Yes from the drop down list box to enable MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Deny to block access to the NBG4115, MAC addresses not listed will
be allowed to access the NBG4115
Select Allow to permit access to the NBG4115, MAC addresses not listed
will be denied access to the NBG4115.
Set This is the index number of the MAC address.
MAC
Address
Enter the MAC addresses of the wireless station that are allowed or denied
access to the NBG4115 in these address fields. Enter the MAC addresses in
a valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
Apply Click Apply to save your changes back to the NBG4115.
Reset Click Reset to reload the previous configuration for this screen.
C
om
pan
y
C
on
fiden
tial