ZyXEL Communications NBG-417N, User Manual, Page: 55 / 279

Chapter 5 AP Mode
User
’
s Guide
56
2
To set your NBG4115 to AP Mode , go to Maintenance > Sys OP Mode >
General and select Access Point.
Figure 25 Maintenance > Sys OP Mode > General
3
A pop-up appears providing information on this mode. Click OK in the pop-up
message window. (See Section 22.2 on page 196 for more information on the
pop-up.) Click Apply . Your NBG4115 is now in AP Mode .
Note: You have to log in to the Web Configurator again when you change modes.
5.3 The Status Screen in AP Mode
Click on Status . The screen below shows the status screen in AP Mode .
Figure 26 Status: AP Mode
C
om
pan
y
C
on
fiden
tial