ZyXEL Communications NBG-417N, User Manual, Page: 245 / 279

Appendix D Setting up Your Computer
’
s IP Address
User
’
s Guide
246
4
For statically assigned settings, do the following:
• From the Configure box, select Manually .
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your Prestige in the Router address box.
5
Click Apply Now and close the window.
6
Turn on your Prestige and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer ’ s TCP/IP settings in Red
Hat Linux 9.0. Procedure, screens and file location may vary depending on your
Linux distribution and release version.
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1
Click the Red Hat button (located on the bottom left corner), select System
Setting and click Network .
Figure 141 Red Hat 9.0: KDE: Network Configuration: Devices
C
om
pan
y
C
on
fiden
tial