ZyXEL Communications NBG-417N, User Manual, Page: 52 / 279

Chapter 4 Connection Wizard
User
’
s Guide
53
The following table describes the fields in this screen.
4.6 Connection Wizard Complete
Click Finish to complete the wizard setup.
Figure 23 Connection Wizard Complete
You have successfully set up your NBG4115 to operate on your network and
access the Internet.
Table 19 Wizard Step 3: WAN MAC Address
LABEL DESCRIPTION
Factory Default Select Factory Default to use the factory assigned default MAC
address.
Clone the
computer
’ s MAC
address
Select this option and enter the IP address of the computer on the
LAN whose MAC you are cloning. It is advisable to clone the MAC
address from a computer on your LAN even if your ISP does not
presently require MAC address authentication.
Set WAN MAC
Address Select this option and enter the MAC address you want to use.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Exit Click Exit to close the wizard screen without saving.
C
om
pan
y
C
on
fiden
tial