Chapter 4 Web Configurator
XMG1930 Series User’s Guide
58
After clicking
Next
, the
Link Aggregation
screen appears.
Figure 37
Wizard > Basic > Step 3 Link Aggregation
Version
Select the SNMP version for the Switch. The SNMP version on the Switch must match the
version on the SNMP manager. Choose SNMP version 2c (
v2c
), SNMP version 3 (
v3
) or both
(
v3v2c
).
Note: SNMP version 2c is backwards compatible with SNMP version 1.
Get Community
Enter the
Get Community
string, which is the password for the incoming Get- and
GetNextrequests from the management station.
The
Get Community
string is only used by SNMP managers using SNMP version 2c or lower.
Set Community
Enter the
Set Community
string, which is the password for the incoming Set- requests from
the management station.
The
Set Community
string is only used by SNMP managers using SNMP version 2c or lower.
Trap Community
Enter the
Trap Community
string, which is the password sent with each trap to the SNMP
manager.
The
Trap Community
string is only used by SNMP managers using SNMP version 2c or lower.
Previous
Click
Previous
to show the previous screen.
Next
Click
Next
to show the next screen.
Cancel
Click
Cancel
to exit this screen without saving.
Table 12 Wizard > Basic > Step 2 Password (continued)
LABEL
DESCRIPTION
