Chapter 4 Web Configurator
XMG1930 Series User’s Guide
49
6
The
Setup
Wizard
screen will appear. You can use the
Setup Wizard
screen to configure the Switch’s IP,
login password, SNMP community, link aggregation, and view a summary of the settings. When you finish
configuring the settings, you can click the
Apply
& Save
button to make the settings take effect, and
save your configuration into the Switch’s non-volatile memory at once. Check the screens to see if the
settings are applied.
Otherwise, click the
Exit
button. You can select the
Ignore this wizard next time
check box and click
Apply
& Save
if you do not want the
Setup Wizard
screen to appear the next time you log in. If you want
to open the
Setup Wizard
screen later, click the
Wizard
icon in the upper right hand corner of the Web
Configurator.
Figure 26
Web Configurator: Wizard
7
If you did not change the default administrator password and/or SNMP community values, a warning
screen displays each time you log into the Web Configurator and select
Standard Mode
. Click
Password
/ SNMP
to open a screen where you can change the administrator password and SNMP community
string simultaneously. Otherwise, click
Ignore
to close it.
