Chapter 24 Multicast
XMG1930 Series User’s Guide
212
The following table describes the labels in this screen.
Table 98 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering Profile
LABEL
DESCRIPTION
Profile Name
Enter a descriptive name for the profile for identification purposes.
To configure additional rules for a profile that you have already added, enter the profile
name and specify a different IP multicast address range.
Start Address
Enter the starting multicast IP address for a range of multicast IP addresses that you want to
belong to the IGMP filter profile.
End Address
Enter the ending multicast IP address for a range of IP addresses that you want to belong to
the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the
Start Address
and
End
Address
fields.
Add
Click this to create a new entry.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
Save
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Clear
Click
Clear
to reset the fields to the factory defaults.
Profile Name
This field displays the descriptive name of the profile.
Start Address
This field displays the start of the multicast address range.
End Address
This field displays the end of the multicast address range.
Delete Profile
Select a profile’s check box to select a specific profile. Otherwise, select the check box in the
table heading row to select all profiles.
Delete Rule
Select the check boxes of the rules that you want to remove from a profile.
Delete
To delete the profiles and all the accompanying rules, select the profiles that you want to
remove in the
Delete Profile
column, then click the
Delete
button.
To delete rules from a profile, select the rules that you want to remove in the
Delete Rule
column, then click the
Delete
button.
Cancel
Click
Cancel
to clear the
Delete Profile
or
Delete Rule
check boxes.
