Chapter 8 Basic Setting
XMG1930 Series User’s Guide
95
You can configure up to 32 IP domains which are used to access and manage the Switch from the ports
belonging to the pre-defined VLANs.
Note: You must configure a VLAN first. Each VLAN can have multiple management IP
addresses, and you can log into the Switch through different management IP
addresses simultaneously.
8.5.2 IP Status
Figure 62
Basic Setting > IP Setup: IP Status
The following table describes the labels in this
screen.
8.5.3 IP Status Details
Use this screen to view IP status details. Click a number in the
Index
column in the
IP Status
screen to
display the screen as shown next.
Table 28 Basic Setting > IP Setup: IP Status
LABEL
DESCRIPTION
IP Status
Domain Name
Server
This field displays the IP address of the DNS server.
Source
This field displays whether the DNS server address is configured manually (
Static
) or obtained
automatically using
DHCPv4
.
Note: If DNS server is not configured or configuration is deleted, the system
automatically uses the default
Backup
server.
IP Interface
Index
This field displays the index number of an entry.
IP Address
This field displays the IP address of the Switch in the IP domain.
IP Subnet Mask
This field displays the subnet mask of the Switch in the IP domain.
VID
This field displays the VLAN identification number of the IP domain on the Switch.
Type
This shows whether this IP address is dynamically assigned from a DHCP server or manually
assigned (
Static
).
Renew
Click this to renew the dynamic IP address.
Release
Click this to release the dynamic IP address.
