manualshive.com logo in svg

ZyXEL Communications GS1350 Series, User Manual

The ZyXEL Communications GS1350 Series provides an exceptional networking solution. Enhance your user experience with our comprehensive User Manual, available for free download from manualshive.com. This manual offers clear instructions and valuable insights to ensure seamless setup and operation of your GS1350 Series, empowering you with optimal performance.

Share
Download
background image

 Chapter 4 Web Configurator

GS1350 Series User’s Guide

63

Cloud 
Management

This screen displays a link to a screen where you can enable or disable the 

Nebula Control 

Center Discovery 

feature. If it is enabled, you can have the Switch search for the NCC (Nebula 

Control Center). Another link takes you to the 

Nebula Switch Registration

 screen which has a 

QR code containing the Switch’s serial number and MAC address for handy registration of the 
Switch at NCC.

Advanced Application

VLAN

This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending 
on what you configured in the 

Switch Setup 

menu). You can also configure a voice VLAN, a 

MAC based VLAN or a vendor ID based VLAN in these screens.

Static MAC 
Forwarding

This link takes you to a screen where you can configure static MAC addresses for a port. These 
static MAC addresses do not age out.

Static Multicast 
Forwarding

This link takes you to a screen where you can configure static multicast MAC addresses for 
ports. These static multicast MAC addresses do not age out.

Filtering

This link takes you to a screen to set up filtering rules.

Spanning Tree 
Protocol

This link takes you to screens where you can configure the RSTP to prevent network loops.

Bandwidth 
Control

This link takes you to a screen where you can configure bandwidth limits on the Switch.

Broadcast Storm 
Control

This link takes you to a screen to set up broadcast filters.

Mirroring

This link takes you to screens where you can copy traffic from one port or ports to another port 
in order that you can examine the traffic from the first port without interference.

Link Aggregation

This link takes you to screens where you can logically aggregate physical links to form one 
logical, higher-bandwidth link.

Port Security

This link takes you to a screen where you can activate MAC address learning and set the 
maximum number of MAC addresses to learn on a port.

Time Range

This link takes you to a screen where you can define different schedules.

Queuing Method This link takes you to a screen where you can configure queuing with associated queue 

weights for each port.

Multicast

This link takes you to screens where you can configure various multicast features and IGMP 
snooping.

AAA

This link takes you to a screen where you can configure authentication, authorization and 
accounting services via external servers. The external servers should be RADIUS (Remote 
Authentication Dial-In User Service).

DHCP Snooping

This link takes you to screens where you can configure filtering of unauthorized DHCP packets in 
your network.

Loop Guard

This link takes you to a screen where you can configure protection against network loops that 
occur on the edge of your network.

Errdisable

This link takes you to screens where you can view errdisable status and configure errdisable 
settings in CPU protection, errdisable detect, and errdisable recovery.

Green Ethernet

This link takes you to a screen where you can configure green Ethernet settings in EEE, auto 
power down, and short reach for each port.

LLDP

This link takes you to screens where you can configure LLDP settings.

Auto PD 
Recovery

This link takes you to a screen where you can enable and configure Auto PD Recovery on the 
Switch.

ONVIF

This link takes you to a screen where you can configure a specific VLAN to run ONVIF.

IP Application

DiffServ

This link takes you to screens where you can enable DiffServ, configure marking rules and set 
DSCP-to-IEEE802.1p mappings.

Table 17   Navigation Panel Links (Standard Mode) (continued)

LINK

DESCRIPTION

Summary of Contents for GS1350 Series


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GS1350 Series

CALIENT S320 Hardware User'S Manual preview
S320
Brand: CALIENT Pages: 46
CALIENT S320 Getting Started Manual preview
S320
Brand: CALIENT Pages: 42
IBM RackSwitch G8264 Product Manual preview
RackSwitch G8264
Brand: IBM Pages: 20
IBM Flex System FC3171 Installation And User Manual preview
Flex System FC3171
Brand: IBM Pages: 64
Brightlink 16x16 Manual preview
16x16
Brand: Brightlink Pages: 33
Delta EXPERT-POE-54G User Manual preview
EXPERT-POE-54G
Brand: Delta Pages: 4
H3C S1200 Series Compliance And Safety Manual preview
S1200 Series
Brand: H3C Pages: 90
Cross Technologies 1582-225L2 Instruction Manual preview
1582-225L2
Brand: Cross Technologies Pages: 20
N-Tron NT24k User Manual preview
NT24k
Brand: N-Tron Pages: 132
Imtex-Controls SLR Series Installation & Adjusting Instructions preview
SLR Series
Brand: Imtex-Controls Pages: 2
Paugge ENT-MX20B16X16 User Manual preview
ENT-MX20B16X16
Brand: Paugge Pages: 20
PKP PSA10 Instruction Manual preview
PSA10
Brand: PKP Pages: 11
Harman AMX ENOVA DVX-3250HD-SP Instruction Manual preview
AMX ENOVA DVX-3250HD-SP
Brand: Harman Pages: 119
Cabletron Systems SmartSTACK 100 User Manual preview
SmartSTACK 100
Brand: Cabletron Systems Pages: 110
Allen-Bradley 105-C09 Series Installation Instruction preview
105-C09 Series
Brand: Allen-Bradley Pages: 2
Cabletron Systems SmartStack STS16-20R Installation And User Manual preview
SmartStack STS16-20R
Brand: Cabletron Systems Pages: 258
S&T kontron KSwitch D3 UM User Manual preview
kontron KSwitch D3 UM
Brand: S&T Pages: 38
Stahl 128635 Operating Instructions Manual preview
128635
Brand: Stahl Pages: 29

Brands by name

Popular brands

Load more brands