Chapter 49 Switching
GS1350 Series User’s Guide
358
49.10 VLAN Port Setting
Use this screen to configure the static VLAN (IEEE 802.1Q) settings on a port. Click the
VLAN Port Setting
tab in the
VLAN
screen.
Figure 266
Switching > VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Table 181 Switching > VLAN > VLAN Port Setting
LABEL
DESCRIPTION
Port
This field displays the port number.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Ingress Check
If this check box is selected, the Switch discards incoming frames on a port for VLANs that do
not include this port in its member set.
Clear this check box to disable ingress filtering.
PVID
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so
that the frames are forwarded to the VLAN group that the tag defines.
Enter a number between 1and 4094 as the port VLAN ID.
Acceptable
Frame Type
Specify the type of frames allowed on a port. Choices are
All
,
Tag Only
and
Untag Only
.
Select
All
from the drop-down list box to accept all untagged or tagged frames on this port.
This is the default setting.
Select
Tag Only
to accept only tagged frames on this port. All untagged frames will be
dropped.
Select
Untag Only
to accept only untagged frames on this port. All tagged frames will be
dropped.
VLAN Trunking
Enable
VLAN Trunking
on ports connected to other switches or routers (but not ports directly
connected to end users) to allow frames belonging to unknown VLAN groups to pass through
the Switch.
