Chapter 8 Basic Setting
GS1350 Series User’s Guide
115
8.10.8 IPv6 Neighbor Discovery Setup
Use this screen to configure neighbor discovery settings for each interface. Click the link next to
IPv6
Neighbor Discovery Setup
in the
IPv6 Configuration
screen to display the screen as shown next.
Figure 90
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup
IPv6 Global
Address
Manually configure a static IPv6 global address for the interface.
Prefix Length
Specify an IPv6 prefix length that specifies how many most significant bits (start from the left) in
the address compose the network address.
EUI-64
Select this option to have the interface ID be generated automatically using the EUI-64 format.
Add
Click this to create a new entry.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
Save
link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Clear
Click
Clear
to reset the fields to the factory defaults.
Index
This is the interface index number. Click on an index number to change the settings.
Interface
This is the name of the IPv6 interface you created.
IPv6 Global
Address/Prefix
Length
This field displays the IPv6 global address and prefix length for the interface.
EUI-64
This shows whether the interface ID of the global address is generated using the EUI-64 format.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Check the entries that you want to remove and then click
Delete
to remove the selected entries
from the summary table.
Cancel
Click
Cancel
to clear the check boxes.
Table 43 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup (continued)
LABEL
DESCRIPTION
