Chapter 15 Interface Group
EMG3425-Q10A User’s Guide
116
15.2.2 Add Interface Group Criteria
Click the
Add
button in the
Interface Group
screen to open the following screen.
Figure 69
Interface Group > Add New Group > Add Interface Group Criteria
The following table describes the fields in this screen.
#
This shows the index number of the rule.
Filter Criteria
This shows the filtering criteria. The LAN interface on which the matched traffic
is received will belong to this group automatically.
Back
Click this button to return to the previous screen without saving any changes.
Apply
Click this button to save your settings back to the EMG3425-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 47
Interface Group > Add New Group
LABEL
DESCRIPTION
Table 48
Interface Group > Add New Group > Add Interface Group Criteria
LABEL
DESCRIPTION
DHCP Option 60
Select this option and enter the Vendor Class Identifier (Option 60) of the
matched traffic, such as the type of the hardware or firmware.
Vendor ID
Enter the identification number assigned to the company by the IANA (Internet
Assigned Numbers Authority).
Apply
Click this button to save your settings back to the EMG3425-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Summary of Contents for EMG3425-Q10A
