EMG3425-Q10A User’s Guide
114
C
H A P T E R
1 5
Interface Group
15.1 Overview
By default, all LAN and WAN interfaces on the EMG3425-Q10A are in the same group and can
communicate with each other. Each group acts as an independent network on the EMG3425-Q10A.
15.2 The Interface Group Screen
You can manually add a LAN and/or WLAN interface to a new group. Click
Network > Interface
Group
to open the following screen.
Figure 67
Network > Interface Group
The following table describes the fields in this screen.
Table 46
Network > Interface Group
LABEL
DESCRIPTION
Add
Click this to add a new interface grouping rule.
You must configure a WAN connection before you can add a new interface
grouping rule. See
for more information.
Interface Grouping Rules
Name
This shows the descriptive name of the group.
WAN Interface
This shows the WAN interfaces in the group.
LAN Interfaces
This shows the LAN and/or WLAN interfaces in the group.
Criteria
This shows the filtering criteria for the goup.
Delete
Click the
Delete
icon to remove the group.
Summary of Contents for EMG3425-Q10A
