ZyXEL Communications EMG3425-Q10A, User Manual

Page: 79 / 250

Chapter 9 Wireless LAN
EMG3425-Q10A User’s Guide
79
9.4 More AP Screen
This screen allows you to enable and configure multiple wireless networks and guest wireless
network settings on the EMG3425-Q10A.
You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the EMG3425-
Q10A. This allows you to use one access point to provide several BSSs simultaneously. You can then
assign varying security types to different SSIDs. Wireless clients can use different SSIDs to
associate with the same access point.
Click Network > Wireless LAN 2.4G/5G > More AP . The following screen displays.
Figure 37
Network > Wireless LAN 2.4G/5G > More AP
The following table describes the labels in this screen.
9.4.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen.
The following screen displays.
Table 23
Network > Wireless LAN 2.4G/5G > More AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Status This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
SSID An SSID profile is the set of parameters relating to one of the EMG3425-Q10A’s BSSs. The
SSID (Service Set IDentifier) identifies the Service Set with which a wireless device is
associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the
wireless client utility.
Security This field indicates the security mode of the SSID profile.
Edit Click the Edit icon to configure the SSID profile.