Chapter 26 Troubleshooting
EMG3425-Q10A User’s Guide
188
5
If the problem continues, contact the vendor.
26.3 EMG3425-Q10A Access and Login
I don’t know the IP address of my EMG3425-Q10A.
1
The default IP address of the EMG3425-Q10A in
Router Mode
is
192.168.1.1
. The default IP
address of the EMG3425-Q10A in
Access Point Mode
is
192.168.1.2
.
2
If you changed the IP address and have forgotten it, you might get the IP address of the EMG3425-
Q10A in
Router Mode
by looking up the IP address of the default gateway for your computer. To do
this in most Windows computers, click
Start > Run
, enter
cmd
, and then enter
ipconfig
. The IP
address of the
Default Gateway
might be the IP address of the EMG3425-Q10A (it depends on the
network), so enter this IP address in your Internet browser.
3
If your EMG3425-Q10A in
Access Point Mode
is a DHCP client, you can find your IP address from
the DHCP server. This information is only available from the DHCP server which allocates IP
addresses on your network. Find this information directly from the DHCP server or contact your
system administrator for more information.
4
Reset your EMG3425-Q10A to change all settings back to their default. This means your current
settings are lost. See
in the
Troubleshooting
for information on
resetting your EMG3425-Q10A.
I forgot the password.
1
The default password is
1234
.
2
If this does not work, you have to reset the device to its factory defaults. See
I cannot see or access the
Login
screen in the Web Configurator.
1
Make sure you are using the correct IP address.
• The default IP address of the EMG3425-Q10A in
Router Mode
is
192.168.1.1
. The default IP
address of the EMG3425-Q10A in
Access Point Mode
is
192.168.1.2
.
• If you changed the IP address (
), use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
Summary of Contents for EMG3425-Q10A
