ZyXEL Communications AMG1202-T10A User Manual Download Page 75

Page: 75 / 296

Chapter 6 WAN Setup

AMG1202-T10A User’s Guide

differs by the encapsulation you select. When you use the

WAN > Internet Access Setup

screen

to set up Internet access, you are configuring the first WAN connection.

Figure 32

Network > WAN > More Connections

The following table describes the labels in this screen.

Table 18

Network > WAN > More Connections

LABEL

DESCRIPTION

This is an index number indicating the number of the corresponding connection.

Active

This field indicates whether the connection is active or not.

Clear the check box to disable the connection. Select the check box to enable it.

Name

This is the name you gave to the Internet connection.

VPI/VCI

This field displays the Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI) numbers configured for this WAN connection.

Encapsulation

This field indicates the encapsulation method of the Internet connection.

Modify

The first (ISP) connection is read-only in this screen. Use the

WAN > Internet

Access Setup

screen to edit it.

Click the Edit icon to edit the Internet connection settings. Click this icon on an
empty configuration to add a new Internet access setup.

Click the Remove icon to delete the Internet access setup from your connection
list.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Summary of Contents for AMG1202-T10A









































































































































































































































































































Search results

Summary of Contents for AMG1202-T10A

Reviews:

Brands by name

Popular brands

ZyXEL Communications AMG1202-T10A, User Manual

Search results

Summary of Contents for AMG1202-T10A

Reviews:

Brands by name

Popular brands