manualshive.com logo in svg

ZyXEL Communications AMG1202-T10A, User Manual, Page: 34 / 296

Share
Download
ZyXEL Communications AMG1202-T10A User Manual Download Page 34

Chapter 3 Status Screens

AMG1202-T10A User’s Guide

34

Device Information

Host Name

This field displays the ZyXEL Device system name. It is used for identification. 

Model Number This is the model name of your device.

MAC Address

This is the MAC (Media Access Control) or Ethernet address unique to your 
ZyXEL Device.

ZyNOS 

Firmware 

Version

This is the current version of the firmware inside the device. Click this to go to 
the screen where you can change it.

DSL Firmware 

Version

This is the current version of the device’s DSL modem code.

WAN Information

DSL Mode

This is the DSL standard that your ZyXEL Device is using.

Annex Type

This is the ADSL annex type that your ZyXEL Device is using.

IP Address

This is the current IP address of the ZyXEL Device in the WAN. Click this to go to 
the screen where you can change it.

IP Subnet 

Mask

This is the current subnet mask in the WAN.

Default 

Gateway

This is the IP address of the default gateway, if applicable. 

VPI/VCI

This is the Virtual Path Identifier and Virtual Channel Identifier that you entered 
in the wizard or 

WAN

 screen.

LAN Information

IP Address

This is the current IP address of the ZyXEL Device in the LAN. Click this to go to 
the screen where you can change it.

IP Subnet 

Mask

This is the current subnet mask in the LAN.

DHCP

This field displays what DHCP services the ZyXEL Device is providing to the LAN. 
Choices are:

Server

 - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses 

to other computers in the LAN.

Relay 

- The ZyXEL Device

 

acts as a surrogate DHCP server and relays DHCP 

requests and responses between the remote server and the clients.

None

 - The ZyXEL Device is not providing any DHCP services to the LAN.

Click this to go to the screen where you can change it.

WLAN Information

ESSID

This is the descriptive name used to identify the ZyXEL Device in a wireless LAN. 
Click this to go to the screen where you can change it.

Channel

This is the channel number used by the ZyXEL Device now.

Security

This displays the type of security mode the ZyXEL Device is using in the wireless 
LAN.

WPS

This displays whether WPS is activated. Click this to go to the screen where you 
can configure the settings.

Status

This displays whether WLAN is activated.

Security

Firewall

This displays whether or not the ZyXEL Device’s firewall is activated. Click this to 
go to the screen where you can change it.

System Status

Table 4   

Status Screen

LABEL

DESCRIPTION

Summary of Contents for AMG1202-T10A









































































































































































































































































































Reviews:

No comments