ZyXEL Communications AMG1202-T10A User Manual Download Page 280

Page: 280 / 296

Appendix E Services

AMG1202-T10A User’s Guide

280

Table 113

Examples of Services

NAME

PROTOCOL

PORT(S)

DESCRIPTION

AH (IPSEC_TUNNEL) User-Defined

The IPSEC AH (Authentication Header)
tunneling protocol uses this service.

AIM

TCP

5190

AOL’s Internet Messenger service.

AUTH

TCP

113

Authentication protocol used by some
servers.

BGP

TCP

179

Border Gateway Protocol.

BOOTP_CLIENT

UDP

DHCP Client.

BOOTP_SERVER

UDP

DHCP Server.

CU-SEEME

TCP/UDP

7648

24032

A popular videoconferencing solution from
White Pines Software.

DNS

TCP/UDP

Domain Name Server, a service that
matches web names (for instance

www.zyxel.com

) to IP numbers.

ESP
(IPSEC_TUNNEL)

User-Defined

The IPSEC ESP (Encapsulation Security
Protocol) tunneling protocol uses this
service.

FINGER

TCP

Finger is a UNIX or Internet related
command that can be used to find out if a
user is logged on.

FTP

TCP

File Transfer Protocol, a program to enable
fast transfer of files, including large files
that may not be possible by e-mail.

H.323

TCP

1720

NetMeeting uses this protocol.

HTTP

TCP

Hyper Text Transfer Protocol - a client/
server protocol for the world wide web.

HTTPS

TCP

443

HTTPS is a secured http session often used
in e-commerce.

ICMP

User-Defined

Internet Control Message Protocol is often
used for diagnostic purposes.

ICQ

UDP

4000

This is a popular Internet chat program.

IGMP (MULTICAST)

User-Defined

Internet Group Multicast Protocol is used
when sending packets to a specific group
of hosts.

IKE

UDP

500

The Internet Key Exchange algorithm is
used for key distribution and management.

IMAP4

TCP

143

The Internet Message Access Protocol is
used for e-mail.

IMAP4S

TCP

993

This is a more secure version of IMAP4 that
runs over SSL.

IRC

TCP/UDP

6667

This is another popular Internet chat
program.

MSN Messenger

TCP

1863

Microsoft Networks’ messenger service
uses this protocol.

NetBIOS

TCP/UDP

137

138

139

445

The Network Basic Input/Output System is
used for communication between
computers in a LAN.

Summary of Contents for AMG1202-T10A









































































































































































































































































































Search results

Summary of Contents for AMG1202-T10A

Reviews:

Brands by name

Popular brands

ZyXEL Communications AMG1202-T10A, User Manual

Search results

Summary of Contents for AMG1202-T10A

Reviews:

Brands by name

Popular brands