manualshive.com logo in svg

ZyXEL Communications AMG1202-T10A, User Manual, Page: 203 / 296

Share
Download
ZyXEL Communications AMG1202-T10A User Manual Download Page 203

AMG1202-T10A User’s Guide

203

C

HAPTER

    20

Tools

20.1  Overview

This chapter explains how to upload new firmware, manage configuration files and restart your 
ZyXEL Device.

Use the instructions in this chapter to change the device’s configuration file or upgrade its firmware. 
After you configure your device, you can backup the configuration file to a computer. That way if 
you later misconfigure the device, you can upload the backed up configuration file to return to your 
previous settings. You can alternately upload the factory default configuration file if you want to 
return the device to the original default settings. The firmware determines the device’s available 
features and functionality. You can download new firmware releases from your nearest ZyXEL FTP 
site (or www.zyxel.com) to use to upgrade your device’s performance.

Only use firmware for your device’s specific model. Refer to the label on 
the bottom of your ZyXEL Device.

20.1.1  What You Can Do in the Tool Screens

• Use  the

 Firmware Upgrade

 screen (

Section 20.2 on page 203

) to upload firmware to your 

device.

• Use  the 

Configuration 

screen (

Section 20.3 on page 206

) to backup and restore device 

configurations. You can also reset your device settings back to the factory default.

• Use  the 

Restart

 screen (

Section 20.4 on page 208

) to restart your ZyXEL device.

20.2  The Firmware Screen

Click 

Maintenance > Tools 

to open the 

Firmware

 screen. Follow the instructions in this screen to 

upload firmware to your ZyXEL Device. The upload process uses HTTP (Hypertext Transfer Protocol) 
and may take up to two minutes. After a successful upload, the system will reboot. 

Summary of Contents for AMG1202-T10A









































































































































































































































































































Reviews:

No comments