manualshive.com logo in svg

ZyXEL Communications AMG1202-T10A, User Manual

Share
Download
ZyXEL Communications AMG1202-T10A User Manual Download Page 172

Chapter 16 Remote Management

AMG1202-T10A User’s Guide

172

Click 

Advanced > Remote MGMT

 > 

Telnet 

tab to display the screen as shown. 

Figure 90   

Advanced > Remote MGMT > Telnet

The following table describes the labels in this screen.

16.4  The FTP Screen 

You can use FTP (File Transfer Protocol) to upload and download the ZyXEL Device’s firmware and 
configuration files. Please see the User’s Guide chapter on firmware and configuration file 
maintenance

 

for details. To use this feature, your computer must have an FTP client.

Table 64   

Advanced > Remote Management > Telnet

LABEL

DESCRIPTION

Server Port

You may change the server port number for a service if needed, however you 
must use the same port number in order to use that service for remote 
management.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device 
using this service.

Secured Client 
IP Address

A secured client is a “trusted” computer that is allowed to communicate with the 
ZyXEL Device using this service. 

Select 

All

 to allow any computer to access the ZyXEL Device using this service.

Choose 

Selected

 to just allow the computer with the IP address that you specify 

to access the ZyXEL Device using this service.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Summary of Contents for AMG1202-T10A









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands