ZyXEL Communications AMG1202-T10A User Manual Download Page 31

Page: 31 / 296

Chapter 2 The Web Configurator

AMG1202-T10A User’s Guide

2.2.3 Main Window

The main window displays information and configuration fields. It is discussed in the rest of this
document.

Right after you log in, the

Status

screen is displayed. See

Chapter 3 on page 33

for more

information about the

Status

screen.

2.2.4 Status Bar

Check the status bar when you click

Apply

to verify that the configuration has been updated.

QoS

General

Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.

Dynamic

DNS

This screen allows you to use a static hostname alias for a dynamic IP
address.

Remote

MGMT

WWW

Use this screen to configure through which interface(s) and from which
IP address(es) users can use HTTP to manage the ZyXEL Device.

Telnet

Use this screen to configure through which interface(s) and from which
IP address(es) users can use Telnet to manage the ZyXEL Device.

FTP

Use this screen to configure through which interface(s) and from which
IP address(es) users can use FTP to access the ZyXEL Device.

SNMP

Use this screen to configure through which interface(s) and from which
IP address(es) users can access the SNMP agent on the ZyXEL Device.

DNS

Use this screen to configure through which interface(s) and from which
IP address(es) users can send DNS queries to the ZyXEL Device.

ICMP

Use this screen to set whether or not your device will respond to pings
and probes for services that you have not made available.

UPnP

General

Use this screen to turn UPnP on or off.

Maintenance

System

General

Use this screen to configure your device’s password.

Time and Date

Use this screen to change your ZyXEL Device’s time and date.

Logs

System Log

Use this screen to select which logs your device is to record.

Tools

Firmware

Use this screen to upload firmware to your device.

Configuration

Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.

Restart

This screen allows you to reboot the ZyXEL Device without turning the
power off.

Diagnostic

General

Use this screen to test the connections to other devices.

DSL Line

This screen displays information to help you identify problems with the
DSL connection.

Table 3

Navigation Panel Summary

LINK

TAB

FUNCTION

Summary of Contents for AMG1202-T10A









































































































































































































































































































Search results

Summary of Contents for AMG1202-T10A

Reviews:

ZyXEL Communications AMG1202-T10A, User Manual, Page: 31 / 296

Search results

Summary of Contents for AMG1202-T10A

Reviews: