manualshive.com logo in svg

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series, User Manual

The ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series offers reliable connectivity and advanced features. Enhance your user experience with our comprehensive User Manual, available for free download at manualshive.com. Discover the full potential of this product and maximize its capabilities with our easy-to-follow manual.

Share
Download
background image

Prestige 660RU-Tx Series User’s Guide

23

Table 37 Menu 2 WAN Backup Setup   ................................................................................ 129
Table 38 Menu 2.1Traffic Redirect Setup   ........................................................................... 130
Table 39 DHCP Ethernet Setup   ......................................................................................... 134
Table 40 TCP/IP Ethernet Setup   ........................................................................................ 134
Table 41 Menu 3.2.1 IP Alias Setup   ................................................................................... 138
Table 42 Menu 4 Internet Access Setup   ............................................................................ 140
Table 43 Menu 11.1 Remote Node Profile   ......................................................................... 144
Table 44 Menu 11.3 Remote Node Network Layer Options   ............................................... 146
Table 45 Menu 11.8 Advance Setup Options   ..................................................................... 153
Table 46 Menu12.1.1 Edit IP Static Route  .......................................................................... 156
Table 47 Remote Node Network Layer Options: Bridge Fields  .......................................... 159
Table 48 Menu 12.3.1 Edit Bridge Static Route  .................................................................. 160
Table 49 Applying NAT in Menus 4 & 11.3   ......................................................................... 164
Table 50 SUA Address Mapping Rules   .............................................................................. 165
Table 51 Menu 15.1.1 First Set   .......................................................................................... 167
Table 52 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set    .......................... 168
Table 53 Abbreviations Used in the Filter Rules Summary Menu   ...................................... 181
Table 54 Rule Abbreviations Used   ..................................................................................... 182
Table 55 Menu 21.x.1 TCP/IP Filter Rule  ........................................................................... 183
Table 56 Menu 21.1.5.1 Generic Filter Rule  ....................................................................... 186
Table 57 Filter Sets Table  ................................................................................................... 190
Table 58 Menu 22 SNMP Configuration  ............................................................................. 194
Table 59 SNMP Traps   ........................................................................................................ 194
Table 60 Ports and Permanent Virtual Circuits  ................................................................... 195
Table 61 Menu 24.1 System Maintenance : Status   ............................................................ 197
Table 62 Menu 24.2.1 System Maintenance: Information   .................................................. 199
Table 63 Menu 24.3.2 System Maintenance : Syslog and Accounting   .............................. 201
Table 64 Menu 24.4 System Maintenance Menu: Diagnostic   ............................................ 204
Table 65 Filename Conventions  ......................................................................................... 207
Table 66 General Commands for GUI-based FTP Clients   ................................................. 209
Table 67 General Commands for GUI-based TFTP Clients  ............................................... 211
Table 68 Menu 24.9.1 System Maintenance : Budget Management  .................................. 220
Table 69  Menu 24.10 System Maintenance: Time and Date Setting   ................................ 221
Table 70 Menu 24.11 Remote Management Control  .......................................................... 225
Table 71 Menu 25.1 IP Routing Policy Setup  ..................................................................... 230
Table 72 Menu 25.1.1 IP Routing Policy   ............................................................................ 231
Table 73 Menu 26.1 Schedule Set Setup  ........................................................................... 239
Table 74 Troubleshooting the Start-Up of Your Prestige   .................................................... 242
Table 75 Troubleshooting the LAN LED   ............................................................................. 242
Table 76 Troubleshooting the DSL LED   ............................................................................. 243
Table 77 Troubleshooting the LAN Interface   ...................................................................... 243
Table 78 Troubleshooting the WAN Interface  ..................................................................... 243
Table 79 Troubleshooting Internet Access   ......................................................................... 244

Summary of Contents for ADSL2+ Ethernet/USB Gateway 660RU-Tx Series































































































































































































































































































Reviews:

No comments

Related manuals for ADSL2+ Ethernet/USB Gateway 660RU-Tx Series

Calypso Instruments NMEA CONNECT PLUS User Manual preview
NMEA CONNECT PLUS
Brand: Calypso Instruments Pages: 26
Gardena Smart System Operator'S Manual preview
Smart System
Brand: Gardena Pages: 21
MRS 1.033 Operating Instructions Manual preview
1.033
Brand: MRS Pages: 21
Handlink Technologies WG-500P M User Manual preview
WG-500P M
Brand: Handlink Technologies Pages: 156
TANDBERG Codian GW 3201 Series Getting Started preview
Codian GW 3201 Series
Brand: TANDBERG Pages: 18
Yacht Devices YDOG-01 User Manual preview
YDOG-01
Brand: Yacht Devices Pages: 32
TENA 91290 Manual preview
91290
Brand: TENA Pages: 40
Fujitsu GW1500 Getting Started Manual preview
GW1500
Brand: Fujitsu Pages: 46
Fujitsu BACnet UTY-VBGX Instruction Manual preview
BACnet UTY-VBGX
Brand: Fujitsu Pages: 103
Fujitsu UTY-VBGX Instruction Manual preview
UTY-VBGX
Brand: Fujitsu Pages: 159
Kenwood NEXEDGE NX-700 series Instruction Manual preview
NEXEDGE NX-700 series
Brand: Kenwood Pages: 228
Siemens CXG3.X200 Manual preview
CXG3.X200
Brand: Siemens Pages: 12
Siemens SMG 71 Installation Instructions preview
SMG 71
Brand: Siemens Pages: 2
Siemens VNT Installation Instructions Manual preview
VNT
Brand: Siemens Pages: 8
Siemens VersiComm VC1COMMA Installation And Operation Manual preview
VersiComm VC1COMMA
Brand: Siemens Pages: 22
Siemens SIRIUS 3RK3141 Series Original Operating Instructions preview
SIRIUS 3RK3141 Series
Brand: Siemens Pages: 19
Siemens SIMATIC RTLS4330G Operating Instructions Manual preview
SIMATIC RTLS4330G
Brand: Siemens Pages: 28
Siemens Tiastar LV MCC Instruction Manual preview
Tiastar LV MCC
Brand: Siemens Pages: 48

Brands by name

Popular brands

Load more brands