manualshive.com logo in svg

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series, User Manual

Share
Download
ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual Download Page 216

Prestige 660RU-Tx Series User’s Guide

215

Chapter 25 Firmware and Configuration File Maintenance

25.4.4  FTP Session Example of Firmware File Upload

Figure 148   

FTP Session Example of Firmware File Upload

More commands (found in GUI-based FTP clients) are listed earlier in this chapter.

Refer to

 the TFTP and FTP over WAN Management Limitations section 

to read about 

configurations that disallow TFTP and FTP over WAN.

25.4.5  TFTP File Upload

The Prestige also supports the uploading of firmware files using TFTP (Trivial File Transfer 
Protocol) over LAN. Although TFTP should work over WAN as well, it is not recommended.

To use TFTP, your computer must have both telnet and TFTP clients. To transfer the firmware 
and the configuration file, follow the procedure shown next.

1

Use telnet from your computer to connect to the Prestige and log in. Because TFTP does 
not have any security checks, the Prestige records the IP address of the telnet client and 
accepts TFTP requests only from this address.

2

Put the SMT in command interpreter (CI) mode by entering 8 in 

Menu 24 – System 

Maintenance

.

3

Enter the command “

sys stdio 0

” to disable the console timeout, so the TFTP transfer 

will not be interrupted. Enter “

sys stdio 5

” to restore the five-minute console timeout 

(default) when the file transfer is complete.

4

Launch the TFTP client on your computer and connect to the Prestige. Set the transfer 
mode to binary before starting data transfer.

5

Use the TFTP client (see the example below) to transfer files between the Prestige and the 
computer. The file name for the firmware is “

ras

”.

Note that the telnet connection must be active and the Prestige in CI mode before and during 
the TFTP transfer. For details on TFTP commands (see following example), please consult the 
documentation of your TFTP client program. For UNIX, use “

get

” to transfer from the 

Prestige to the computer, “

put

” the other way around, and “

binary

” to set binary transfer 

mode.

331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> put firmware.bin ras
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 1103936 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit

Summary of Contents for ADSL2+ Ethernet/USB Gateway 660RU-Tx Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands