manualshive.com logo in svg

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series, User Manual

Share
Download
ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual Download Page 87

Prestige 660RU-Tx Series User’s Guide

Chapter 8 Dynamic DNS Setup

86

C

H A P T E R

8

Dynamic DNS Setup

This chapter discusses how to configure your Prestige to use Dynamic DNS.

8.1  Dynamic DNS

Dynamic DNS allows you to update your current dynamic IP address with one or many 
dynamic DNS services so that anyone can contact you (in NetMeeting, CU-SeeMe, etc.). You 
can also access your FTP server or Web site on your own computer using a domain name (for 
instance myhost.dhs.org, where myhost is a name of your choice) that will never change 
instead of using an IP address that changes each time you reconnect. Your friends or relatives 
will always be able to call you even if they don't know your IP address.

First of all, you need to have registered a dynamic DNS account with www.dyndns.org. This is 
for people with a dynamic IP from their ISP or DHCP server that would still like to have a 
domain name. The Dynamic DNS service provider will give you a password or key. 

8.1.1  DYNDNS Wildcard

Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the 
same IP address as yourhost.dyndns.org. This feature is useful if you want to be able to use, 
for example, www.yourhost.dyndns.org and still reach your hostname.

8.2  Configuring Dynamic DNS

To change your Prestige’s DDNS, click 

Dynamic DNS

. The screen appears as shown.

Note: 

If you have a private WAN IP address, then you cannot 

use Dynamic DNS.

Summary of Contents for ADSL2+ Ethernet/USB Gateway 660RU-Tx Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands