manualshive.com logo in svg

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series, User Manual

Share
Download
ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual Download Page 91

Prestige 660RU-Tx Series User’s Guide

Chapter 10 Remote Management Configuration

90

C

H A P T E R

10

Remote Management

Configuration

This chapter provides information on configuring remote management.

10.1  Remote Management Overview

Remote management allows you to determine which services/protocols can access which 
Prestige interface (if any) from which computers.

You may manage your Prestige from a remote location via:

• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only, 
• Neither (Disable).

To disable remote management of a service, select 

Disable

 in the corresponding 

Server 

Access 

field.

You may only have one remote management session running at a time. The Prestige 
automatically disconnects a remote management session of lower priority when another 
remote management session of higher priority starts. The priorities for the different types of 
remote management sessions are as follows.

1

Telnet

2

HTTP

10.1.1  Remote Management Limitations

Remote management over LAN or WAN will not work when:

• A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, 

FTP or Web service. 

• You have disabled that service in one of the remote management screens.
• The IP address in the 

Secured Client IP

 field does not match the client IP address. If it 

does not match, the Prestige will disconnect the session immediately.

• There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time.

Summary of Contents for ADSL2+ Ethernet/USB Gateway 660RU-Tx Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands