manualshive.com logo in svg

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series, User Manual, Page: 215 / 286

Share
Download
ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual Download Page 215

Prestige 660RU-Tx Series User’s Guide

Chapter 25 Firmware and Configuration File Maintenance

214

Figure 147   

Telnet Into Menu 24.7.2 System Maintenance 

To upload the firmware and the configuration file, follow these examples

25.4.3  FTP File Upload Command from the DOS Prompt Example

1

Launch the FTP client on your computer.

2

Enter “

open

”, followed by a space and the IP address of your Prestige.  

3

Press 

[ENTER] 

when prompted for a username.

4

Enter your password as requested (the default is “1234”).

5

Enter “

bin

” to set transfer mode to binary.

6

Use “

put

” to transfer files from the computer to the Prestige, for example, “

put 

firmware.bin ras

” transfers the firmware on your computer (firmware.bin) to the 

Prestige and renames it “

ras

”. Similarly, “

put config.rom rom-0

” transfers the 

configuration file on your computer (config.rom) to the Prestige and renames it “

rom-0

”. 

Likewise “

get rom-0 config.rom

” transfers the configuration file on the Prestige to 

your computer and renames it “

config.rom

.” See earlier in this chapter for more 

information on filename conventions.

7

Enter “

quit

” to exit the ftp prompt.

Menu 24.7.2 - System Maintenance - Upload System Configuration File

To upload the system configuration file, follow the procedure below:

  1. Launch the FTP client on your workstation.
  2. Type "open" and the IP address of your system. Then type "root" and
     SMT password as requested.
  3. Type "put configuration filename rom-0" where "configurationfilename"
     is the name of your system configuration file on your workstation, which
     will be transferred to the "rom-0" file on the system.
  4. The system reboots automatically after the upload system configuration
     file process is complete.

For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.

Press ENTER to Exit:

Note: 

The Prestige automatically restarts after a successful file 

upload.

Summary of Contents for ADSL2+ Ethernet/USB Gateway 660RU-Tx Series































































































































































































































































































Reviews:

No comments