manualshive.com logo in svg

ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series, User Manual

Share
Download
ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual Download Page 41

Prestige 660RU-Tx Series User’s Guide

Chapter 2 Introducing the Web Configurator

40

• Click 

Wizard Setup

 to begin a series of screens to configure your Prestige for the first 

time.

• Click a link under 

Advanced Setup 

to configure advanced Prestige features.

• Click a link under 

Maintenance 

to see Prestige performance statistics, upload firmware 

and back up, restore or upload a configuration file.

• Click 

Site Map

 to go to the 

Site Map

 screen.

• Click 

Logout

 in the navigation panel when you have finished a Prestige management 

session.

Figure 5   

 Web Configurator: Site Map Screen 

Note: 

Click the 

 icon (located in the top right corner of most screens) to 

view embedded help. 

Table 3   

Web Configurator Screens Summary

LINK

SUB-LINK

FUNCTION

Wizard Setup

Connection 

Setup

Use these screens for initial configuration including general 

setup, ISP parameters for Internet Access and WAN IP/DNS 

Server/MAC address assignment.

Advanced Setup

Password

Use this screen to change your password.

LAN

Use this screen to configure LAN DHCP and TCP/IP settings.

WAN

WAN Setup

Use this screen to change the Prestige’s WAN remote node 

settings.

WAN Backup

Use this screen to configure your traffic redirect properties and 

WAN backup settings.

NAT

SUA Only

Use this screen to configure servers behind the Prestige.

Full Feature

Use this screen to configure network address translation 

mapping rules.

Security

Use this screen to configure Internet security and apply the 

predefined filter rules.

Dynamic DNS

Use this screen to set up dynamic DNS.

Time and Date

Use this screen to change your Prestige’s time and date.

Summary of Contents for ADSL2+ Ethernet/USB Gateway 660RU-Tx Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands