Zultys ZIP2, User Manual

Page: 32 / 98

24
ZIP2 User’s Manual
5.3.3.1 SIP Server Settings
The top panel section, next to the SIP Server Settings text, lists the current server, port, and
domain. You can enter values for these parameters, which are loaded to the phone when you
press the Save SIP Settings button. Any parameter that you leave blank at the time you press the
Save SIP Settings button will be filled on the basis of information provided via DNS-SRV.
Server Address. This is either the IP address or the Fully Qualified Domain Name (FQDN) of the
SIP Server. When this parameter is left blank, the software performs a DNS-SRV lookup to resolve
the SIP server for your domain.
Port. This parameter configures the transport protocol port number. The default port for both
TCP and UDP transports is 5060, which is the value recommended by the SIP specification.
Domain Name. This is the domain name which will be used along with the user name to construct
the address of record.
Send Registration Request. When this option is selected, the phone sends a Registration Request
to the SIP Server when it is initially powered up and then once every 1800 seconds.
Backup Server Address. This is either the IP address or the FQDN of the backup SIP server. The
SIP Extensions Panel, described in section A.2.6 on page 53, sets the criteria for bypassing the
primary SIP server
Backup Server Port. This parameter configures the transport protocol port number for the backup
SIP server. The default port for both TCP and UDP transports is 5060, which is the value
recommended by the SIP specification.
Figure 5-2 LAN Configuration panel