Zultys ZIP2, User Manual

Page: 55 / 98

47
A p p e n d i x A
Download and Configuration Utility
A.1 Introduction
This chapter describes each Download and Configuration Utility panel. Refer to section 5.3 on
page 22 for instructions on using these panels to configure the ZIP2 phone.
A.1.1 Accessing the Download and Configuration Utility
You access the utility through a web browser that can access the same network as the ZIP2 being
configured. Enter the IP address of the ZIP2 in the address entry box of your web browser and
press the enter button. The Home panel, shown in figure A-1, will appear in your browser.
A.1.2 Interface Structure
Each panel is accessed by selecting options from two menu bars. The main menu bar runs
vertically on the left side of the window. Main menu bar options include Home, LAN, SIP,
CODEC, System, Download, and Reset.
The secondary menu runs horizontally, directly above the configuration parameters. Secondary
menu bar options depend on the selected main menu bar item.
All panels with editable parameters provide a save button which must be pressed to download
changes to the phone. After changes are saved to the phone’s memory, they take effect only after
power cycling the phone or performing a reset operation, as described in section A.2.16 on page
59.
A.2 Web Interface panels
A.2.1 Home
The Home panel introduces the web interface and provides basic information about the ZIP2
phone. To access this panel, enter the web interface or select Home in the main menu.
The Home panel reports the status and values of the following parameters:
System Uptime. The continuous time that the ZIP2 phone has been in service since the last power
cycle.