Zultys ZIP2, User Manual

Page: 84 / 98

76
ZIP2 User’s Manual
B.4.6 Audio Configuration
Audio parameters configure codecs and paging extensions. Figure B-12 lists the Audio
configuration parameters.
Parameter Description
Equivalent
web interface
parameter
Version
Introduced
AJB_MAXDELAY Specifies the Maximum playout delay for
the Adaptive jitter buffer.
Default value is 100 (milliseconds).
section A.2.10.2
on page 56
3.35
AUTO_JB_SWITCH Specifies whether or not to automatically
switch from an adaptive jitter buffer to a
fixed jitter buffer upon fax/modem tone
detection.
Default value is NO.
section A.2.10.2
on page 56
3.35
ENABLE_PAGING_SWITCH Enables Paging capabilities
YES – Enable
NO – Disable
Default Value is YES. section A.2.10.3
on page 56
3.35
FJB_DELAY Specifies the playout delay on the Fixed
jitter buffer.
Default value is 40 (milliseconds)
section A.2.10.2
on page 56
3.35
G711AON Specifies whether to offer G.711 A-Law as
the speech encoding method:
Default value is YES.
section A.2.10.1
on page 56
3.35
G711APACK Specifies the packetization interval for
G.711 A-Law packets, where 20 indicates
each RTP packet will carry 20 milliseconds
worth of audio input. Supported intervals
are 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100
msecs, respectively.
Default value is 20 (msecs).
section A.2.10.1
on page 56
3.35
G711ASS Specifies whether to enable Silence
Suppression for G.711 A-Law packets.
Default value is NO.
section A.2.10.1
on page 56
3.35
G711UON Specifies whether to offer G.711 u-Law as
the speech encoding method:
Default value is YES.
section A.2.10.1
on page 56
3.35
G711UPACK Specifies the packetization interval for
G.711 u-Law packets, where 20 indicates
each RTP packet will carry 20 milliseconds
worth of audio input. Supported intervals
are 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100
msecs, respectively.
Default value is 20 (msecs).
section A.2.10.1
on page 56
3.35
Figure B-12 Audio Configuration Parameters