19
C h a p t e r 4
Installation
4.1
Preparing the ZIP2 for Use
4.1.1
Handset
Connect the handset cord into the socket located on the left side panel of the phone, shown in
4.1.2
Power
Provide power to the ZIP2 by connecting the ac adapter into the power socket (DC In) on the top
panel of the phone, as shown in figure 4-2. The ZIP2 does not have a power switch. Figure 4-1
displays the location of the DC In socket.
Important
You should only use an ac adapter provided by Zultys. If you are unable to obtain
this, use an adapter that has a dc output of 12 V, 600 mA. The plug should be
2.0 mm or 2.1 mm with the center positive.
Zultys does not warrant operation of
the ZIP2 with any adapters other than those supplied by Zultys for the ZIP2.
When the ZIP2 receives power, it performs a quick power on self test. While powering up, the red
and yellow LEDs flash twice.
Figure 4-1
Left Panel of ZIP2
Summary of Contents for ZIP2
