Chapter 4 Service Configuration
4.1.50 show running-config
Purpose
This command shows the non-default configurations of the system.
Command Mode
All configuration modes
Syntax
show running-config
[{
include
|
begin
}<
string
>]
Parameter Description
Parameter
Description
include
Only shows the command lines that match the character string
defined by the
<string>
parameter.
begin
Shows the command lines that begin with the character string
defined by the
<string>
parameter.
<
string
>
Defines a character string.
Guidelines
This command without any parameters can show all the non-default configurations.
Example
The following example shows configurations of the system:
zte(cfg)#show running-config
4.1.51 show start-config
Purpose
This command shows all the non-default configurations of the system when the
write
command is run the last time.
Command Mode
All configuration modes
Syntax
show start-config
4-27
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
