Zte ZXR10 5250 Series, Command Reference Manual

Page: 267 / 708

Chapter 4 Service Configuration
Parameter Description
Parameter Description
< 0-63 > Instance ID.
port <
1-52
>
Port number. Different devices have different port number ranges.
In the syntax, the 5250-52TC device is used as an example.
trunk <
trunklist
> Trunk list.
enable Enables the loop-guard function.
disable
Disables the loop-guard function.
Guidelines
The ports enabling the loop-guard function cannot forward data.
Example
The following example enables loop-guard of port 1 in instance 1:
zte(cfg)#set stp instance 1 port 1 loop-guard enable
4.12.25 set stp instance priority
Purpose
This command sets the priority of bridge in instance.
Command Mode
Global configuration mode
Syntax
set stp instance < 0-63 > priority < 0-61440 >
Parameter Description
Parameter Description
<
0-63
> Instance ID
< 0-61440 > Priority of bridge
Guidelines
The priority must be a multiple of 4096. If the value you enter is not a multiple of 4096, the
system will automatically transform it to the value closest to the multiple of 4096.
Example
The following example sets the priority of bridge in instance 1 to 4096:
4-209
SJ-20131111172707-003|2013-11-27 (R1.0) ZTE Proprietary and Confidential